170630
ronbow.com
INSTALLATION SHEET
2
SOLUTIONS
Vanity
Model
:
059324
059330
059336
059348
Figure 2.
Step 3:
Carefully lay the vanity down and
simply screw the cone leg into the hole
located on bottom of the vanity.
For 48” Vanity, be sure to install the
supporting leg that is included in the
vanity package.
Verify the vanity is level.
Adjust the leg levelers if needed.
Determine the ideal location of your
new vanity.
Note:
Check if the location has at least
two studs. Front notch the studs and
install a 2x4 horizontal beam. This will
add stability for the vanity.
Step 1:
PRE-INSTALLATION
Leveler
INSTALLING THE CONE LEG
Supporting leg
(48” Vanity only)
See Figure 1.
Figure 1.
See Figure 2.
