Dens 2pt Cal
Min.
Max.
Default
Description
Lo Cal Mode
Empty
Selects measurement condition used
to establish the low calibration value.
Do Dens Lo Cal
method
Lo/1pt Value
0.000
9999.999
0.001
Lo/1pt Cal Cap
0
65535
dynamic
V$!
Process
Selects measurement condition used
to establish the high calibration value.
//V$!
method
V{!"
0.0000
999.999
0.200
V$!$!&
0
65535
dynamic
1/uT
0.0001
9.9999
0.5422
2.3 Linearization
The X96SI/R is capable of performing a multi-point linearization of the level data when required
by an application. The linearization table contains thirty-two entries, numbered 1 through 32.
!%''B!!"!"?!!'"!!"?!!J!'%!'!'B'%'
used . The Linearization menu controls the linearization mechanism and contains the following
items:
Linearization
Description
Enable
Enable to permit linearization
L1-L8:
Summary of table entries 1 through 8. _ if entry not used, U if used.
L9-L16:
Summary of table entries 9 through 16. _ if entry not used, U if used.
L17-L24:
Summary of table entries 17 through 24. _ if entry not used, U if used.
L25-L32:
Summary of table entries 25 through 32. _ if not used, U if used.
Set Lin Point
Used to set the lin point.
Clear Table
Clears the table.
Sort Table
Sorts the table.
2.4 Calibrate Head Temp
[%$!>!'V
