A
OPERATING INSTRUCTIONS
20
leakage.
1)For optimal performance the battery should
be kept on constant charge when not in use.
2)The battery should be charged in a cool, dry
place.
3)The battery does not need to be fully
discharged before recharging.
4)2 to 3 initial charging cycles may be
required after purchase to achieve maximum
run time capacity.
5)The battery can be safely stored down to
-20
o
C (-4
o
F).
ASSEMBLY/ADJUSTMENT
Do not connect the battery and/or the safety
key before product is completely assembled.
1. ASSEMBLY
The lawn mower is sold disassembled. The
complete handle bar and the grass collector
must be fitted before the lawn mower can
be used. In order to assemble the lawn
mower without difficulty, follow the operating
instructions step by step, with reference to the
pictures as you do so.
IMPORTANT! Before you assemble the lawn
mower, check the accessories according
above information, make sure the accessories
is completed.
2. FITTING THE HANDLE BAR (See Fig D
to H)
1) Slide the lower part of the handle bar into
the guidance tube so that holes will line up
(see fig D). Then fasten the lower part of the
handle bar with the bolts and nuts using the
spanner included in delivery (see fig E).
Lift the upper handle bar, align it with the
lower handle bar, making sure the cable is not
twisted, and fasten them by using the bolts
and wing nuts (3) included in carton box.
Insert the bolts into the holes; screw the wing
nuts clockwise. (See Fig F,G)
Try to turn the bolts to make sure that it be
fully inserted into the hole of lower handle bar.
Incorrect assembly about bolts will cause that
the handle knobs can not be fitted onto the
bolts.
3). Fasten the cable to the handle with the
cable clips (6) included in carton box. (See
Fig H)
Fig D
Fig E
Fig F
Summary of Contents for CLM46NU
Page 27: ...27 A ...
