Fig.8-1: Attach lower connector (D)
to post (L) by using bolts (CC), flat
washers (BB).
Fig.7: Insert the slanting
beam (C) into the lower
connector 1 (D).
Fig.8:
Insert the slanting beam
(C) to the top connector (G),
then assemble the hook (Q) to
the top connector.
Fig.9:
Secure the
connectors (F and F1) to the
screens by using bolts (CC)
and flat washers (BB).
Fig.11: Insert the small
beam (H) into the small
connector (I).
Fig.10: Insert the middle
beams (E and E1) into the
top connector (G). Put on
the big canopy (S) and do
not unfold first.
Fig.9-1: Insert the middle
beam (E and E1) into the
lower connectors (F and
F1).
