14
GB
15
GB
KNOW YOUR PRODUCT
Know your product
1. Laser light assembly
2. Laser light on/off button
3. Laser light aperture
4. Trigger switch
5. Lock-off button
6. Motor housing
7. Main handle
8. Front handle
9. Bevel adjustment knob
10. Bevel scale
11. Parallel fence locking knob
12. Parallel fence
13. Blade guard lever
14. Lower blade guard
15. Base plate
16. Upper blade guard
17. Dust extraction port
18. Depth locking lever
19. Depth of cut indicator
20. Spindle lock button
21. Blade
22. Blade wrench storage area (back of saw)
23. Blade wrench
24. Blade guide notch
1
11
Description of symbols
The rating plate on your tool may show
symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for
additional protection.
Tool is listed by Underwriters
Laboratories and listed to
Canadian Standards by
Underwriters Laboratories
Environmental protection
Recycle unwanted materials
instead of disposing of them
as waste. All tools, hoses and
packaging should be sorted, taken
to the local recycling centre and
disposed of in an environmentally
safe way.
Warnings
1. Do not attempt to change the position of
the laser under any circumstances, it has
been set at the factory and is accurately
focused on the center of the saw blade.
2. It may be more difficult to see the laser
line in conditions of bright sunshine and
on certain surfaces.
Specifications
Voltage:
120V ~ 60Hz
Power rating:
14 Amp
No-load speed:
4,700 RPM
Blade diameter:
7 1/4" (184 mm)
Blade teeth:
24 TCT
Blade arbour:
5/8" (16mm)
Blade kerf:
3/32" (2.4mm)
Bevel capacity:
0° to 55°
Depth of cut at 90°:
2 3/8" (60mm)
Depth of cut at 45°:
1 7/8" (47mm)
Weight:
11.73 lbs (5.28 kg)
Safety rules for laser lights
The laser guide used in the tool is Class
II with a maximum output of 1mW and a
wavelength of 650nm. The laser guide does
not normally present an optical hazard,
although staring at the beam may cause flash
blindness.
USER INFORMATION
CAUTION.
The use of optical instruments
with this laser product will increase the
chance of eye damage.
• Do not stare into the laser beam.
• The laser shall be used and maintained
in accordance with the manufacturer’s
instructions.
• Never aim the beam at any person or an
object other than the work piece.
• Always ensure the laser beam is aimed at
a sturdy work piece without a reflective
surface (i.e. wood or rough coated
surfaces are acceptable). Bright shiny
reflective sheet or the like is not suitable
for laser use as the reflective surface could
direct the beam back at the operator.
DESCRIPTION, SPECIFICATIONS AND
INSTRUCTIONS
2
3
5
6
8
10
9
13
15
16
17
24
4
7
14
18
19
20
21
23
12
ATTENTION
Summary of Contents for 2001580
Page 14: ...26 27 ...