Leister Process Technologies, Galileo-Strasse 10, CH-6056 Kaegiswi/Switzerland
confirms that this product, in
the version as brought into circulation through us, fulfils the requirements of the following EC directives.
Directives:
98/37, 2004/108, 2006/95
Harmonized Standards:
EN 12100-1, EN 12100-2, EN 60204-1,
EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 50366, EN 62233,
EN 60745-1
Kaegiswil, 06.02.2009
Bruno von Wyl
Christiane Leister
Technical Director
Owner
Power tools, accessories and packaging should be sorted for environmental-friendly recycling.
Only for EC
countries
: Do not dispose of power tools into household waste! According to the European Directive
2002/96 on waste electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected and sent for recovery
in an environmental-friendly manner.
Disposal
Conformity
14
• After use, disconnect the tool from the power supply. Remove the
cutting blade cover (14)
. Clean the
cutting
blade, cutter housing
and
dustbag (17)
. Refit the
cutting blade cover (14)
.
• The carbon brushes of the tool's motor should be checked after about 1600 hours running time by your Service
Centre.
• Repairs have to be carried out by authorised
Leister Service Centres
only. They guarantee a specialized and
reliable
repair service within 24 hours
using original Leister spare parts.
• For this tool, we generally provide a warranty of one (1) year from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be corrected by replacement or repair.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
Warranty
Service and Repairs
Maintenance
