Mode d’emploi
Moisture kit
"Hygromaster“
Ref. 93214
e) Device Configuration & The parameters are presented in the
following order.
upper part
of the
screen
lower
part of
the
screen
Meaning
By default
Min.
Max.
dan input the device's
configuration mode (display is
frozen until buttons are
pressed)
Reconfiguration with default
factory settings
0(no)
0(no)
1(yes)
Configuring the automatic
downtime. 0 = on until
manually stop
2 mn
0
9 mn
Selecting
° C (and ppm) or ° F
(and gpp)
°C
°C
°F
Set the pot on the side of the
device to the surface
temperature ON (On) or off
(Off)
OFF
OFF
ON
Setting the sound level: 0 = Off
(no sound), 1 = minimum, 2=
maximum
2
(maximum)
0
2
The new configuration is saved after pressing. With the exception of the function
the temperature sensor, the settings are saved when the camera is off: Probe function
temperature of the side port automatically returns to OFF (OFF) when the camera is off. For
return to normal operating mode, press (or any button for 5 seconds) at any
configuration time.
f) Selection of surface temperature port
(shortcut) &
upper part
of the
screen
lower part
of the
screen
Meaning
By default
Min.
Max.
-
Configure the port on the
side of the device to the
surface temperature ON
(On) or off (Off)
OFF
OFF
ON
This is a shortcut to configure the port of the surface temperature sensor without using the menu
configuration. When the two buttons are pressed, the lower part of the screen changes from ON (ON)
OFF (OFF).
5
