13.
Installation
Operation instructions:
Do not operate without water. Turn off the unit when the water cavity is empty.
Detach the upper casing from the base unit
Place the humidifier on a firm surface in an upright position. Then pull the body
casing upward to open the unit as shown (Fig 1)
Place the body casing downward on the base unit. When well attached, the edge of
the body casing should match well with the edge of the base unit.
Fill the water cavity with tap water until the water level is right above the water level
guideline (approximately 200ml). Never overflow and do not use distilled water and
iced water. Otherwise, the generation of mist may be affected (Fig 2)
Never add water directly to the air chimney (Fig 3)
