13. Installation
1.
Unpack all the components with care. Lay the pieces of the frame out on the floor
orientated as suggested in fig 1.
Fig 1.
There is no particular order to assembly but the following points remain the same:
2.
Be sure to orientate the crossbeam sections so that the eyebolt holes are evenly
spaced when erected. On both the large and small crossbeam sections the flanges
closest to the eyebolt holes make up the crossbeam join.
3.
Bolt all sections together fully. (See fig 2).
Fig 2
Summary of Contents for 17687
Page 21: ......
