13.
Installation
1.
Choose a safe, suitable and dry indoor location for your net.
2.
No fixings are included in this product – choose suitable fixings that will comfortably
hold the weight of the net – approximately 1kg. The net should be installed out of
reach. The net requires one electrical socket – the cable from the net to the plug
measures approximately 1m.
3.
Fully unwrap the net – do not plug it in until it is free of packaging and spread out.
Carefully suspend the net – do not puncture the wiring.
4.
Plug into an electrical socket. There is no ON/OFF switch.
5.
Use the press button on the plastic controller box to choose from one of 8 light
effects:
1.
Combination
2.
In Waves
3.
Sequential
4.
Slo-Glo
5.
Chasing/Flash
6.
Slow Fade
7.
Twinkle/Flash
8.
Steady On
14.
Care and Maintenance
Unplug before cleaning. Wipe the net with a clean, soft and very slightly dampened
cloth. Do not allow the net to become wet. Keep the product clean and dry.
The net is intended for visual purposes – it is not intended to be handled.
This net contains LEDs - the lamps do not need to be changed.
The plug/adapter may become warm during normal operation and may emit a slight
buzzing noise. This is normal and does not indicate any fault. Keep the product and
the adapter away from sources of heat and free from obstacles, especially avoiding
contact with items that could be damaged by heat. If using fire-retardant drapes (e.g.
Ceiling Cloud) below the net, allow space between the net and the drapes.
Once this product is eventually exhausted, please dispose of it responsibly and
appropriately.
15.
Troubleshooting
Problem: The net does not light up?
Ensure that the net is plugged in - if applicable, make sure the small connector into
the adapter has not become dislodged
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
COSMIC EFFECT NET 16217, June 2017
Copyright ROMPA® Ltd
