EN - 9 -
Before Using your Fridge
• When using your fridge for the first time, or after transportation, keep it in
an upright position for at least 3 hours before plugging into the mains. This
allows efficient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the first time. This is normal and the
smell will fade away when your fridge starts to cool.
USING THE APPLIANCE
PART - 2.
Thermostat Setting
The fridge thermostat automatically regulates
the temperature of the compartment. Fridge
temperatures can be obtained by rotating the
knob to higher numbers, 1 to 5.
Important note:
Do not try to rotate the
knob beyond position 1, it will stop your
appliance from working.
Thermostat Settings
• Set the knob to a low/medium position, up to 3, for short-term storage of food in the
appliance.
• Set the knob to a medium position, 3 or 4, for long-term storage of food in the appliance.
• For long-term storage of food in the refrigerator, you can set knop maximum position
(4 - 5).
Larders (coolers) have not any freezer compartment but can cool up to 4 - 6 °C.
Super freezing:
This switch shall be
used as superfreeze switch. For maximum
freezing capacity, please turn on this switch
before 24 hours placing fresh food. After
placing fresh food in the freezer, 24 hours
ON position is generally sufficient. In order
to save energy, please turn off this switch
after 24 hours from placingfresh food.
Super switch
(
In some models
)
Super switch
(
In some models
)
Thermostat knob
Lamp cover
