•
•
•
How to operat
NOTE:
•
•
•
•
•
Place the strainer with the press cone on the juice container.
positioned in the designated
Make sure the strainer fits properly
Place the large press cone on the small one. In doing so, make sure that the indentations o
match with the wipe
Place the top cover.
How to operat
NOTE:
We recommend the following
Connect the mains plug
The rest of the cable which is not needed can be
Remove the top cover
Choose the press cone
grapefruits, the smaller one is suitable for citrons etc.
Turn the appliance on or off (
Place the strainer with the press cone on the juice container.
in the designated
Make sure the strainer fits properly
Place the large press cone on the small one. In doing so, make sure that the indentations o
match with the wipe-off fingers of the smaller one
Place the top cover.
How to operate your appliance
•
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
motor might be damaged!
•
Before conne
there are no foreign objects in the juice container and in the
strainer!
e recommend the following
Connect the mains plug!
st of the cable which is not needed can be
Remove the top cover.
Choose the press cone. 2
uits, the smaller one is suitable for citrons etc.
Turn the appliance on or off (
Place the strainer with the press cone on the juice container.
in the designated indentations. The press cone is connected
Make sure the strainer fits properly.
Place the large press cone on the small one. In doing so, make sure that the indentations o
off fingers of the smaller one
e your appliance
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
motor might be damaged!
Before connecting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
strainer!
e recommend the following range: press for 15 seconds, afterwards make a break of 15 seconds.
st of the cable which is not needed can be
. 2 differently sized press cones are available
uits, the smaller one is suitable for citrons etc.
•
Turn the appliance on or off (press the fruits
Place the strainer with the press cone on the juice container.
indentations. The press cone is connected
Place the large press cone on the small one. In doing so, make sure that the indentations o
off fingers of the smaller one.
e your appliance
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
motor might be damaged!
cting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
range: press for 15 seconds, afterwards make a break of 15 seconds.
st of the cable which is not needed can be stored
tly sized press cones are available
uits, the smaller one is suitable for citrons etc.
Choose the pulp concentration.
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
the strainer.
Small gap means less pulp and less flow
juice container.
press the fruits).
Press halved citrus fruit with the cut face on the press cone and hold it.
The appliance starts whenever pressure is ap
stops as soon as the pressure is released.
If the pressure is too heavy, the press cone will pause
until the press cone starts running again.
The press cone can
can change during pressing.
Place the strainer with the press cone on the juice container. Make sure the retention clips of the strainer are
indentations. The press cone is connected
Place the large press cone on the small one. In doing so, make sure that the indentations o
.
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
motor might be damaged!
cting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
range: press for 15 seconds, afterwards make a break of 15 seconds.
tored in the cord take
tly sized press cones are available
uits, the smaller one is suitable for citrons etc.
Choose the pulp concentration.
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
the strainer.
Small gap means less pulp and less flow
ice container.
Press halved citrus fruit with the cut face on the press cone and hold it.
The appliance starts whenever pressure is ap
stops as soon as the pressure is released.
If the pressure is too heavy, the press cone will pause
until the press cone starts running again.
The press cone can turn clockwise or anticlockwise, t
can change during pressing.
Make sure the retention clips of the strainer are
indentations. The press cone is connected with the motor shaft
Place the large press cone on the small one. In doing so, make sure that the indentations o
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
cting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
range: press for 15 seconds, afterwards make a break of 15 seconds.
in the cord take-up at the underside of the base unit
tly sized press cones are available: The larger one is suitable for fruits like oranges,
Choose the pulp concentration.
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
Small gap means less pulp and less flow
Press halved citrus fruit with the cut face on the press cone and hold it.
The appliance starts whenever pressure is ap
stops as soon as the pressure is released.
If the pressure is too heavy, the press cone will pause
until the press cone starts running again.
turn clockwise or anticlockwise, t
can change during pressing.
Make sure the retention clips of the strainer are
with the motor shaft
Place the large press cone on the small one. In doing so, make sure that the indentations o
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
cting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
range: press for 15 seconds, afterwards make a break of 15 seconds.
up at the underside of the base unit
The larger one is suitable for fruits like oranges,
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
Small gap means less pulp and less flow – large gap means more pulp in the
Press halved citrus fruit with the cut face on the press cone and hold it.
The appliance starts whenever pressure is ap-plied on the press cone and
stops as soon as the pressure is released.
If the pressure is too heavy, the press cone will pause
until the press cone starts running again.
turn clockwise or anticlockwise, t
Make sure the retention clips of the strainer are
with the motor shaft by slightly
Place the large press cone on the small one. In doing so, make sure that the indentations on the larger press cone
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
cting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
range: press for 15 seconds, afterwards make a break of 15 seconds.
up at the underside of the base unit
The larger one is suitable for fruits like oranges,
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
large gap means more pulp in the
Press halved citrus fruit with the cut face on the press cone and hold it.
plied on the press cone and
If the pressure is too heavy, the press cone will pause – reduce the pressure
turn clockwise or anticlockwise, the direction of rotation
Make sure the retention clips of the strainer are
ly swaying it.
er press cone
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
to cool down for at least 2 minutes. If this is not observed, the
cting this appliance to the mains make sure that
there are no foreign objects in the juice container and in the
range: press for 15 seconds, afterwards make a break of 15 seconds.
up at the underside of the base unit.
The larger one is suitable for fruits like oranges,
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
large gap means more pulp in the
Press halved citrus fruit with the cut face on the press cone and hold it.
plied on the press cone and
reduce the pressure
he direction of rotation
13
The appliance is designed for a max. continuous operation time of
4 minutes. If this time has been reached, the appliance will have
The larger one is suitable for fruits like oranges,
The pulp concentration can be chosen by adjusting the fruit pulp regulator at
large gap means more pulp in the
plied on the press cone and
reduce the pressure
he direction of rotation
