34
•
Attention:
Make sure that the holes in the nozzle are always clean and not clogged.
•
Attention:
For moving the nozzle, only touch it at the upper plastic part.
•
Attention:
After frothing, the system must be cooled manually (see steps 12 – 15).
Step 2:
Position the portafi lter without fi lter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 3:
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 4:
Choose the function “steam”.
Step 5:
Switch the appliance on.
The appliance heats up and the pilot
lamp blinks. When the lamp glows
permanently, the appliance is ready
for use.
Step 6:
Start steam supply.
Turn the rotary knob to the right.
Produce steam for 2 - 3 seconds
to remove residual water from the
system.
Step 7:
Stop steam supply.
Turn the rotary knob to the left.
Step 8:
Remove the vessel.
Step 9:
For frothing milk, dip the nozzle in
the pot with milk.
Step 10:
Start steam supply.
Turn the rotary knob to the right.
Warning:
Casing, brew head,
portafi lter, fi lter inserts and hot
water/steam nozzle are getting hot
during use!
• Check the water tank
regularly, refi ll water if
necessary.
• Check the drip pan
regularly, empty it if
necessary.
Step 1:
Prepare the appliance.
Step 11:
Stop steam supply.
Turn the rotary knob to the left.
