G. Erase Memories
1. In the “set” mode,
after setting the time,
press the key “
”
again to see the symbol
“ ” appear on the LCD,
blinking.
2. Long press the key “
” until the LCD shows
“CL”, and press the key
“ ” again to confirm the erasing of all the measurement results
3. Press the key “ ” to get back to ‘Stand By’ status.
H. About the Touch Key
When installing the battery don’t touch the key pad. The
screen will display “
”, and then it will go out later.
When you turn on the device by using the touch keys,
you should press the touch key for 1 ~ 2 seconds
continuously.
If the touch key doesn’t work properly, please move away your finger, wait
for 4-10 seconds, it would return to correct state.
8
