18
17
ROMBOUTS would like to thank you for purchasing your new made-in-France EOH
espresso machine with its
12 month
warranty. Thanks to a pressure of 15 bar, your
espresso machine can offer the best possible coffee flavour, leaving you free to sit
back and enjoy.
This machine is only compatible with 1.2.3 SPRESSO
®
natural fibre paper pods. Enjoy
the full flavour of quality organic fair trade coffees.
Browse the various coffee regions in Africa, Asia and America via our selection of
coffee pods, all roasted
b
y Rombouts
.
The machine can prepare two sizes of coffee cups thanks to the two no. 3 and no. 4
coffee buttons on the top of the machine. Our aim is to keep all coffee fans happy,
whether they prefer a strong kick or a long relaxing drink.
The machine is part of our eco-responsible policy, and will automatically switch to
standby after 8 minutes without use.
The coffee cannot flow continuously from the machine for more than 60 seconds.
Beyond this period, the coffee cycle stops automatically.
Try the true flavour of an espresso coffee thanks to EOH. Rombouts wishes you a
happy coffee break!
R E C O M M E N D A T I O N S
-
To get the best out of your espresso coffee machine, make sure you follow the
instructions in this manual and take good care of your water quality.
-
Fill the tank (no. 6) with fresh water each time it is used (daily) We do not
recommend using bottled water, without using the tank filter (no. 12), as the
mineral content of such water is often high and could lead to scale in your
machine).
-
Regularly replace the tank filter (no. 12) when the automatic warning (blue light no.
2 flashes slowly) comes on.
-
If the machine is not used for more than 48 hours, we recommend rinsing your
machine’s water circuit.
-
Frequently empty the pod basket (no. 7). A full pod basket can prevent new
coffee pods from entering the machine, and the new pods may be damaged
when the handle is closed (no. 1).
-
Never push on handle no. 1 excessively, this could damage your new coffee pods.
D E S C R I P T I O N O F T H E M A C H I N E
1 - Handle
2 - Central light
3 - Keypad - Small coffee button
4 - Keypad - Large coffee button
5 - Tank lid
6 - Tank
7 - Used pod basket
8 - Lifting cup holder
9 -
Cup holder
10 -
Cup holder insert
11 - Coffee spout
12 - Tank filter
13 - Power cable
14 - Starter pod supplied
with the machine in the
pod basket (
7
). Save for
later use.
F I R S T U S E
-
Remove the machine from its packaging and place it on a stable work surface,
near
to a mains plug.
-
Remove the protective wrapping from the handle (carefully read the user
precautions printed on the wrapping.
-
Remove the pod basket (
7
) from the machine and remove the filter (
12
) and the
starter pod (
14
) it contains. SAVE THE STARTING POD, IT WILL BE USEFUL LATER
-
Remove the protective wrapping from the handle (carefully read the user
precautions printed on the wrapping.
-
Put back the pod basket (
7
),
c
up holder
(
9
), and
c
up holder insert
(
10
).
-
Rinse the water tank (
6
) and tank lid (
5
) with tap water.
-
Rinse the filter (
12
) with tap water.
-
Place the filter (
12
) in the water tank (
6
), in the slot provided for this purpose (push
right to the back – see Filter replacement chapter on page 23).
Then:
1 - Fill the tank with fresh water (
6
).
2 - Plug in the power cable (
13
).
3 - The central light (
2
) will display 3 colours (blue, white and red) one after the other, and
then go out. The machine is now on stand-by.
4 - Press coffee button (
3
) or (
4
) to start heating (both coffee buttons flash).
5 - When the machine reaches the required temperature, the two coffee buttons (
3
)
and (
4
) will stay ON steady.
6 - Use the starter pod (
14
) provided with your machine, previously collected in the pod
basket (
7
).
7 - Pull on the machine handle (
1
) to maximum while lifting to reveal the pod slot.
8 - Insert the starter pod (
14
), whatever side, in the slot and check positioning.
9 - Push the handle (
1
) towards the control buttons until completely closed.
You will need a container with a capacity of 0.5 l or more for the following operations.
Place this container under the machine coffee spout to catch the rinsing liquid.
10 - Press the Large Coffee button (
4
). The light on the selected button will flash slowly
and the other button will go out. Initial rinsing will start. Rinsing will stop automatically
at the end of the cycle.
Repeat the operations twice to finalise rinsing.
11 - After the machine has been rinsed, raise the handle as far as possible (
1
) while pulling
towards you, the starter pod (
14
) will then fall into the used pod basket (
7
). Pick up
the starter pod (
14
) and save for later use, dispose of the liquid in the pod Basket (
7
),
and dispose of the liquid in the container used to catch the rinsing liquid. Refit the pod
Basket (
7
) in place.
After the machine has been rinsed, it can be used normally.
NOTE: If the machine is not used for more than 48 hours, we recommend repeating steps
NOTE: If the machine is not used for more than 48 hours, we recommend repeating steps
1 to 11 of this section
1 to 11 of this section
