7
Product approval
This product meets the requirements of standard EN 12184:2014
The chair is crash-tested in accordance with ISO 10542-5 & 7176-19 – 2008
Check before running
❗
The following should be checked before running:
❗
The battery’s charge status
❗
Set at the required speed
⚠
Turn off the control box before getting in and out
Users are advised that changes to the control parameters and other settings undertaken by the
user or other unauthorised personnel are made at their own risk!
❗
Always let the dealer carry out adjustments and settings
Inspection:
Daily inspection:
⚠
It is extremely important to check the chair for damage on a daily basis. Pay particular
attention to visible breakages in cables and defects in the rubber bellows on the joystick.
✋
If the damage mentioned above is present, the wheelchair should not be used, and
driving it is at your own risk!
⚠
If you find that the wheelchair and its accessories do not operate as expected, or if there
are unusual noises or a suspected defect, contact your wheelchair supplier as soon as
possible.
Weekly check
Parking brake: This test should be carried out on an even surface, with at least one metre’s
clearance around the wheelchair.
1)
Power up the wheelchair.
Check that the wheelchair remains switched on after initialisation and that the
battery indicator shows a sufficient battery level.
2)
Push the joystick slowly forwards, until you hear that the parking brakes are
activated. The wheelchair will now start to run slowly.
