11
⚠
When the wheelchair is exposed to external heat sources, such as the sun’s rays, the surface
temperature may rise so much on some surfaces that you could burn yourself on them. This
applies to dark and black surfaces in particular.
⚠
Warning; the wheelchair’s operating parameters can be adjusted, so they fall outside the limits
specified in the standard (EN 12184). The user must beware of the dangers this can lead to,
such as long braking distances. Always let the dealer carry out adjustments and settings
⚠
Warning; there is a danger of the wheelchair being caught up on poor terrain, e.g. loose sand
or deep holes.
⚠
With regard to fire hazards, it is hereby stated that the combination of the seat’s foam padding
and upholstery has been tested and approved in accordance with EN 1021-1:2006 and EN
1021-2:2006
⚠
Only equipment that is assembled by personnel authorised by ROLTEC may be used.
⚠
When using the chair and its functions, there may be a danger of getting stuck in it. When the
control box is swung in or out to the side, there may be a risk of getting caught on the swivel
fitting.
⚠
A headrest should always be used when the electrical functions - Tilt and Back - are used.
⚠
Beware that, if the chair is left in sunlight, the upholstery can get so hot that it can cause burns.
⚠
The wheelchair’s lift and tilt functions are designed in such a way that they will not fall by
themselves, but will only move when these functions are used.
These functions have also been designed so that they run continuously.
