Rollz cane holder, User Manual

Page: 23 / 44

Attaching your Rollz cane holder to your cane
The Rollz cane holder comes with three rubber
bands, one small, one medium and one large (Fig. 1).
Depending on your cane‘s or crutch‘s diameter you
can use one of these rubber bands to fasten the cane
clamp.
1.
2.
3.
ATTENTION: Always check that the cane clamp is
properly fastened. This means the cane or crutch is
unable to slide once you have fastened the rubber
band.
21
EN
Hold the cane clamp with the opening towards
your cane or crutch, with the bevelled side
upwards. Fasten the cane clamp by pushing it
around your cane or crutch.
Slide the cane clamp to the proper height,
where it will not get in contact with the front
wheels. Which is at approximately 52 cm from
the foot of your cane or crutch (Fig. 2).
Now use one of the rubber bands to fasten the
cane clamp around your cane or crutch.