13
Assemble the Steering Wheel
B
2. Plug the steering wheel connector (A) into the dashboard connector (B).
1. Located the steering wheel screw (8) and nut (9) from the blister box.
3. Slide the steering wheel (3) onto the steering rod.
4. Align the holes on the steering wheel with the holes on the steering rod.
5. Slide the steering wheel screw (8) through the round hole on the steering wheel
and steering rod.
6. Fasten the nut (9) on the end of the screw on the square hole and tighten the
screw with a screwdriver.
Helpful Tip:
1. Check that the steering rod is pushed up
all the way before installing the steering
wheel. Flip the car on its side and push
up on the steering rod from underneath
the car body.
2. Make sure the steering rod stays in
place as the steering wheel is installed.