11
Assemble the Rear Wheels
Left Rear Wheel
1. Locate the washers (14), snap pins (12) and inner wheel spacer (15)
from the blister box
2. Locate the rear axle (pre-installed).
3. Slide the rear axle toward the right side of the car with the motor so that
1
’’
of the axle is visible on the non-motor side.
4. Slide the large washer (14) onto the axle.
5. Slide the inner wheel spacer (15) onto the axle.
6. Align the rear wheel (4) with the hole in the inner wheel spacer and slide
the axle all the way through the wheel.
7. Slide the large washer (14) onto the axle.
8. Insert the straight side of the snap pin (12) through the hole at the end
of the axle to keep the wheel in place.
