10
Assemble the Decorative Wheels
1.
Once the wheel assembly is
complete, slide the decorative
wheel assembly
until it
completely
clicks into the front
and rear
wheel caps (15 and
16).
2.
Al
ign
the holes on the wheel
seats with the holes under the
car body, and use two Type A
screws (24) for each wheel to
affix them to the body.
1. Algin the 3 holes on the
decorative wheel connector
(14) with the holes on the
inside of the decorative wheel
(15).
2. Note that the slot on the
connector must be aligned
with the plastic tab on the
wheel to properly fit, and the
connector will click into place.
3. Insert 3 Type A screws (24)
into the holes, and tighten
with a screwdriver.
4. Repeat for the other wheels.
Front Decorative Wheel
Rear Decorative Wheel
