background image

17

Maintenance

Important Battery and Charger Information

• Only an adult who has read and understands the safety warnings may

handle and operate the battery and battery charger. Keep away from
children.

• Charge the battery for 12 hours before using the scooter for the first

time.

• Charge the battery immediately after each use. Charge for at least 6

hours, but no more than 12 hours.

• Charge the battery at least once a month, even when the scooter is not 

used or stored.

• Never leave the battery in a discharged condition.
• Connect the terminal of the battery and charger, then plug the charger

into a 120V AC outlet.

• It is normal for the charger to heat slightly. If the charger rises above

65°C / 149°F, disconnect the charger and call Customer Service for
assistance.

• Keep the charger away from water or excessive moisture to prevent

short-circuiting.

Do not charge the

battery with any other charger.

• Do not attempt to recharge non-rechargeable batteries with the original

charger.

Do not replace the battery with any other battery, or the warranty 

will be voided.

 

If you need a replacement battery, see Pa

ge 22 for 

replacement information.

• Remove damaged batteries from the scooter immediately. Recycle or

dispose of the used batteries responsibly.

• Do not short circuit the supply terminals.

Summary of Contents for 24V Wave Catcher W301

























Reviews: