Roller Grill SEF 800, Instructions For Use And Installation

Page: 6 / 16

Putting on
Turn on the commutator control knob (n°2 on picture) on wished position according to
desired cooking power. The pilot light (n°1 on picture) ignites
The cooking with infrared radiation (quartz tube and glass ceramic) do not need pre-
heating.
Stopping the appliance
Set the commutator control knob on 0
Disconnect the power cable.
Let the device cool it down
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and con-
fide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Never clean the quartz tubes when they are hot
- Avoid touching quartz tubes with your fingers but use a cloth moistened with spirit.
- Clean regularly the external walls of your device with warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device shielded
from the humidity.
7. TECHNICAL SPECIFICATIONS
6
27