Control pilot light
Commutator
5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
- Unpack carefully the device of its packaging.
- Place the salamander on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materi-
als even if it is very well isolated.
- A distance of minimum 40 cm with the partition or the wall is necessary.
- Remove the protective film from the top, the rear, the sides and the tray.
- Unlock the movable top by unscrewing the screw located on the back of the ma-
chine thanks to a 10 pipe key (models SEM).
- In case of connection directly to the electrical network, a disconnection mode has to
be planned in conformity with the norms.
CAUTION :
During use: never place the machine on surfaces or near walls, partitions or
kitchen furniture and similar— except if they are made with a non combustible
material or recovered with non combustible thermic insulation, and pay atten-
tion to fire preventions rules.
1
1
2
1
2
4
29
Summary of Contents for SEF 800
