4
5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
- Unpack carefully the appliance from its packaging
- Place the equipment on a stable surface.
- Never place the device near a wall or near a partition makes of combustible ma-
terials.
- Remove the protective film from the appliance.
- Position the accessories (see 11. Installation guide)
b) First starting
:
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a normalised plug
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Function
Electronic thermostat (n°1
on picture)
Temperature setting
Switch 0/I (n°2 on picture)
Light + turning plates on / Light + turning plates off
Switch 0/I (n°3 on picture)
On/off
Photo G
Photo D
Your salad’bar is ready. You can place it and plug in with normalized 220-240 V ~
according to the instructions manual
.
11
6. Connection
Connect every wire. ( Picture M)
7. Fix the protection for wires
Fix the stainless steel protection for wi-
res with the screws B (Picture F on
page 2 + Picture N)
8. Final fixation of the mirror
Insert both screws C on the back top of
the uprights (Picture F on page 2 + Pic-
ture O)
Photo N
Photo M
Photo O
