Roller Grill PL 400 G, Instructions For Use And Installation

Page: 17 / 24

Air regulation
The injectors have been designed in order to avoid any air regulation, irrespective of
the type of gas used.
c) Use of the appliance:
Control and display elements
Never use the appliance without its juice collector tray (No. 5 in the photo).
Switching
-
on
1. Press the valve for a few seconds (N°2 in the photo).
2. Press on the piezo (No.1 in the photo) to light the burner.
3. Keep the valve (No.2 in the photo) pressed for some more seconds.
4. The burner then remains lit and it is now possible to increase the power by turning
the power lever (No.2 in the photo).
Grease the plate before cooking every time.
Temperature setting
After the burner is lit; set the appliance to the desired power by turning the control
knob (No.2 in the photo).
Stopping the appliance
-
Set each control knob (No.2 in the photo) to 0: the appliance is completely
switched
-
off.
-
Close the butane or propane cartridge
-
Clean the appliance. (Refer to. 6. Cleaning)
d) Breakdown/Repairs:
In case of breakdown or a damaged part, please call your after
-
sale service and en-
trust any technical operation to a qualified person.
Control/Display Function
Piezo
(No. 1 in the photo)
Switches on the appliance (simultaneously with the set knob)
Set knob
(No. 2 in the photo)
Switches on the appliance (knob pressed simultaneously with pie-
zo)
Controls power (low flame = low power, high flame = high pow-
er)
Opening
(No.3 in the photo)
Can replace the piezo and thus helps to switch on the appliance
using a large matchstick or a gas lighter (simultaneously with the
set knob kept pressed for a few seconds)
17