Roller Grill PL 400 G, Instructions For Use And Installation

Page: 16 / 24

Check the supply pressure using a manometer when all the burners are lit. It must be
equal to the indications on the rating plate.
The fresh air flow required for combustion air supply is:
-
PL 400 G 5.5 m3/h
-
PL 600 G 11.0 m3/h
General conditions of installation
The installation and maintenance of the appliance must be carried out in compliance
with the statutory texts and good practices in force, mainly:
General specifications
For all appliances:
Article GZ Installation with combustible gases and liquefied hydrocarbons.
Then, according to use:
Article CH Heating, ventilation, refrigeration
Air conditioning and domestic hot water steam generation.
Important: Never change the diameter of the injectors.
Gas category table, according to the country of destination of the appliance.
Country of destination Category Gas Pressure Injector diam-
eter
France/ Luxembourg I 3+
I 3B/P
G30/G31
G30/G31
28
-
30/37
50
Ø 85
Ø 85
Germany I 3B/P G30/G31 50 Ø 85
Austria I 3B/P G30/G31 50 Ø 85
Belgium I 3+ G30/G31 28
-
30/37 Ø 85
Sweden/Denmark/Finland I 3B/P G30/G31 30 Ø 85
Spain I 3+
I 3P
G30/G31
G31
28
-
30/37
50
Ø 85
Ø 85
Netherlands I 3B/P
I 3P
G30/G31
G31
28
-
30/37
50
Ø 85
Ø 85
Norway I3B/P G30/G31 30 Ø 85
Iceland/Greece/United King-
dom/Italy/Portugal
I 3+ G30/G31 28
-
30/37 Ø 85
16