16
5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
-
Unpack carefully the device of its packaging.
-
Place it on a plane and heatproof surface.
-
Never place the device near a wall or near a partition makes of combustible
materials even if it is very well isolated.
-
A distance of minimum 10 cm with the partition or the wall is necessary.
-
Remove the protective films
-
Never plug the toaster on a multi socket adaptor.
-
Plug the toaster on a 16A plug minimum.
-
Never expose the plug to a heating source.
b) First starting
:
During the first use, warm your machine up outside to evacuate residual smokes of
manufacturing oil from the metallic parts. This may emit a slight smell for a few mo-
ments.
First cleaning
Clean the device before the first use. (See 6. Cleaning)
Connection of the device
-
Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
-
Check that neither the cord nor the plug are damaged. If necessary, it has to be
replaced by the manufacturer, its after sale service or any qualified person to
avoid any risk.
-
Make sure that every control knob is positioned on 0.
-
Unwind completely the electric power cable and connect it in a plug connected
with the earth.
-
The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
