9
1
2
3
4
5
Memory card
• The memory card is not included in the scope of delivery; you
must purchase an additional memory card. Please use only Mi-
croSD cards of speed class 10 or video speed class V10 or higher.
• Please use a memory card with a size between 8 GB to 32 GB.
• Please format the MicroSD card with FAT32 before use.
Note: When formatting, the entire contents of the SD Card
deleted, please back up your files.
Insert SD card
Make sure the camera is powered
off and the card is inserted correctly
by pushing the card into the slot
until you hear a click.
Removing SD card
Make sure the camera is turned
off, slide the card into the card slot
until you feel a click, then you can
safely remove the MicroSD card.
Notes:
1. Do not release your finger before
removing the memory card.
2. Format your memory card regularly.
We recommend once a month.
3. If you remove or insert a MicroSD card when turning on the
power, your data or camera may be damaged.
Connections
1. USB connector for power cable
Before installing the camera on a motorcycle, you can connect
the camera to a power source for operation using the USB
power cord.
Note
• Power supply unit or power bank require a 5V / 2.0 A output.
• Please note that if the power bank is low, the camera will not
start normally.
• If the camera is connected to the USB power cable, the GPS
receiver will only work if there is enough power.
1
2
3
4
5
Red (power)
Black (GPS interface)
Blue (rear camera)
Yellow (remote control)
Green (front camera)