35
This is how it works:
This is how it looks:
This is what it‘s for:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
More details about flash
photography
Flash output is controlled
automatically, but flash
exposure compensation is
possible.
Press the MENU button on
the camera back and use the
four-way control to select
the Flash mode. Then select
the Power subfunction
where you can choose
between the following
settings: +2.0, +1.5, +1.0,
+0.5, 0.0 (default), -0.5, -1.0,
-1.5 and –2.0. Confirm your
selection by pressing the
Right arrow of the
four-way control.
In digital photography, the
high sensitivity of the CCD
sensor may result in
relatively bright flash
pictures.
This is why you should
experiment with flash
exposure compensation –
described at left – as well as
with slow sync that brings
out weaker background
illumination in addition to
your flash-illuminated
foreground subject.
Be sure to experiment with
all available flash modes –
it‘s worth your while! Digital
photography is instan-
taneous: You will see your
picture right after you take
it. So you can repeat it at
will, if necessary. And your
pictures will surely benefit
from mastery of the
different flash modes.
Switching the camera off will
reset it to „Autoflash with
red-eye reduction“ and
default output.
Mode dial set to Camera icon
Taking pictures
