Rollei d41 Owner'S Manual Download

Page: 13 / 77

Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]

Names of parts and controls

Focus/Flash-ready indicators

Focus indicator (green)

Lights

Subject in focus.

Blinks rapidly

Focusing impossible.

(approx. 8x per second)

(Insufficient contrast, subject too dark or too close.

In macro mode:

subject too far away.)

Blinks slowly

Image being written to CompactFlash‘ card

(approx. 2x per second)

or loaded from card.

Focus area

Flash indicator (orange)

Lights

Flash fully charged and ready to fire.

Blinks rapidly

Flash being recycled,

(approx. 8x per second)

shutter cannot be released.

Blinks slowly

With flash switched off,

(approx. 2x per second)

camera uses slow shutter speed

– risk of camera shake.

In autofocus mode, the

camera will focus on the

area marked gray.

Summary of Contents for d41














































































Search results

Summary of Contents for d41

Reviews:

Related manuals for d41

Brands by name

Popular brands

Rollei d41, Owner'S Manual

Search results

Summary of Contents for d41

Reviews:

Related manuals for d41

Brands by name

Popular brands