20
This is how it works:
This is how it looks:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
21
This is how it works:
This is how it looks:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail [email protected]
This is what it‘s for:
This is what it‘s for:
Power supply
Using the optional
power-supply unit
The camera can be operated
on external power with the
aid of the optional power-
supply unit. This is advisable
for prolonged shooting
sessions to save battery
power. The power-supply
unit is particularly helpful
when the camera is linked
up with a PC.
Before changing over from
battery power to AC or vice
versa, make sure that your
camera is turned off. Never
change the power supply
with the camera switched
on!
Connect the plug to the
power-supply terminal of
the camera.
Plug the power-supply unit
into a wall outlet.
Note that the power-supply
unit will not recharge any
batteries in the camera. To
charge these, use a
commercial charger.
Even with the power-supply
unit, the camera will
automatically cut off (for
safety reasons) after 30
minutes of non-use.
To reactivate the camera,
simply press the power
switch.
Using the CompactFlash
memory card
Always switch off your
camera before inserting
or changing a Com-
pactFlash card! Other-
wise, the data on the
card may be lost or the
card itself damaged.
Open the card slot as
shown.
Insert the CF card with its
contacts forward into the
camera.
Be sure not to tilt or jam the
card.
To avoid jamming, make
sure the card is inserted with
the proper end facing the
camera.
Never use force to avoid
damage to card and camera.
The card slot of the camera
has a small hinged safety
and ejector lever. This holds
the card in place and –
when folded – serves to
eject it.
After properly inserting the
card, push it as far as it will
go. The safety lever will
move out and can be folded.
To remove the card, fold the
lever out and push to eject
the card slightly.
Note
:
CF cards (type I) can be
inserted into the camera
only in one direction
and
with the
proper side up
.
Before important events, it is
advisable to practice the
exchange of memory cards
at home.
Memory card
