Rollei CARDVR-308, User Manual

Page: 6 / 42

5
Notes on Installation
1. Before installing the device, measure the front windshield
viewing area, make sure not to block driver's front view, install
the device below the rearview mirror (the central, higher right
position of the front windshield). And we recommend that the sky
and the land occupied by the screen 50%, fix the car holder and
then adjust the device so that the lane is aligned with the screen.
Proper installation enables the device to maximize the efficiency
also can enhance the accuracy of LDWS.
2. Make sure that the lens is within the wiping range of the
windscreen wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be
left on the lens and will result in unclear videos or pictures.
Clean the lens on a regular basis.
4. Do not install the device on a tinted window. Doing so may
damage the tint film.
5. Make sure that the installation position is not hindered by the
tinted window.
6. This product is suitable for light windshield or light color
heat-resistant film windows, it will affect video quality if install it
on the dark windows or dark heat-resistant film windows.
7. Use the products of the attached power charger only, please do
not use other brand power charger, in order to avoid equipment
burn or cause the battery explosion.
8. The suction cup bracket is designed for temporary mounting and
will require periodic re-installation. The adhesive bracket is
designed for one time and long term installation. We
recommend using the adhesive bracket if permanent installation
is desired. We are NOT liable for any damages or data loss
due to improper bracket mounting or suction cup bracket losing
seal and dropping.