23
3.4 Parking Mode
To monitor the vehicle when it is parked, you can activate
Vibration
Detection,
or
Motion Detection
.
Follow the steps below to change the settings for Parking Mode:
1.
Press the
/
button to enter the main menu.
2.
Press the
or
button to
select
Parking Mode
, and then
press
the
button
to
confirm.
3.
Press the
or
button to
configure Parking Mode (Off /
Vibration Detection / Motion
Detection), and then press the
button to complete setting.
4.
Press the
button to return
to recording screen.
•
Off:
No parking monitoring activated.
•
Vibration Detection:
-
If disconnected external power supply when the device is
powered on, the system alert message “
Press OK to
power off or enter Vibration Detection after 10 sec
”.
This means the system will power off and enter Vibration
Detection automatically in 10 seconds.
-
Once Vibration Detection Mode is triggered, when the
device detects any vibration, it will automatically power on
and start recording, the event will be recorded for 60
seconds (per file).
-
In this mode, the device is powered off until event
happens. This mode is more power saving.
-
To disable this function, in the vibration detection
recording, press any key to wake up the screen, and
resume to normal loop recording; or when the car
Summary of Contents for CARDVR-308
Page 1: ......
Page 11: ...10 2 2 Installing in Vehicles 2 2 1 Mount to Windshield 2 2 2 Adjust the device position Knob ...
Page 42: ......
