Page 2.5
Easy spring WAND Installation Manual | April 2018
© Copyright 2018 | Rollease Acmeda Group
PRE-TENSION ADJUSTMENT – SHADE INSTALLED
Insert Socket Ratchet onto adjusting shaft and rotate in
counter clockwise to increase pre-turns as required.
NOTE: If there is insufficient space to rotate Socket Ratchet
within installation, Shade will need to be removed from the
bracket to undertake process.
Re-check functionality of blind as per process i, ii & iii outlined
above in this step.
(Pretension direction is reversed for LH control)
Insert Socket Ratchet onto adjusting shaft and rotate in a
clockwise direction to decrease pre-turns as required.
NOTE: If there is insufficient space to rotate Socket Ratchet
within installation, Shade will need to be removed from the
bracket to undertake process.
Re-check functionality of blind as per process i, ii & iii outlined
above in this step.
(Pretension direction is reversed for LH control)
PRE-TENSION ADJUSTMENT – SHADE REMOVED
Hold the shade and use the Socket Ratchet
to rotate the adjusting shaft (and wand
control head) in an anti-clock wise
direction enough to release the booster
lock. The ratchet will move back under the
spring tension.
While holding the shade, grip the
wand control head and also prevent
both from turning. To add tension,
rotate the Socket Ratchet for the
number of turns desired in a counter
clockwise. (Note, to remove tension
allow the spring to unwind in the
clockwise direction)
To re-lock the booster and shade, while
holding the shade, release the wand
control and rotate the Socket Ratchet
enough to re-engage the lock (approx. ¼
turn). The ratchet should move back under
the booster tension to the locked position.
