Page 2.3
Easy spring WAND Installation Manual | April 2018
© Copyright 2018 | Rollease Acmeda Group
PART C
– PRETENSION CHECKS
STEP 1 – CHECK FUNCTIONALITY OF PRE-TENSIONED SHADE
i)
PULL
Bottom Rail
down to bottom
location
ii) Shade will raise within range
indicated below to be locked and
provide a 'Release Allowance'
(for raising the shade)
iii)
TUG
Bottom Rail
(Shade will automatically
rise)
NOTE: As limits are not set,
ensure Bottom Rail is
controlled so Shade doesn't
Crash into structure and
damage fabric
If Bottom Rail raises at the
desired speed, the correct
number of pre-turns have been
assigned
If Shade stops midway or slows significantly, insufficient pre-turns
have been applied.
Pre-turns to be added
If Shade operates too fast, too many pre-turns have been
applied.
Pre-turns to be removed
PROCEED TO PART D
MAX 33mm (1.3”)
PULL
←
Limit Position
