Page 2.5
EASY SPRING ULTRA Installation Manual | April 2017
© Copyright 2017 | Rollease Acmeda Group
SPRING OPERATION
Adding Pre‐Turns
(Pretension direction is reversed for RH control)
Removing Pre‐Turns
Slightly turn spring head in the same direction to pre‐tension
Release spring head and it will un‐tension itself (Spring head
will spin in the opposite direction of pre‐tensioning)
PART D
– SET LIMITS
STEP 2 – SET TOP LIMIT
Ensure shade (blind) is fully raised
To lower the top limit position rotate limiter head so that the
shade (blind) moves down.
To raise the top limit position rotate limiter head so that the
shade (blind) raises.
*Standard back roll shown, reverse for front roll
