Page 4.1
EASY SPRING ULTRA Installation Manual | April 2017
© Copyright 2017 | Rollease Acmeda Group
SECTION 4
− TROUBLESHOOTING
NO. PROBLEM
CAUSE
SOLUTION
1
Cannot find limit
Limit incorrectly Set
TOP LIMIT
a)
Position Shade (blind) fully retracted
b)
Wind limit adjustment wheel in the direction that would lower
the shade (blind)
c)
When the shade (blind) starts to lower this indicates the limit
has been engaged
d)
Use limit adjustment wheel to raise or lower limit as required
2
Erratic Behaviour
Shade (blind) fails
quickly
Connector on wrong
end
Remove and re‐install on other end (See Assembly Manual, Section 4,
Part C)
Decelerator on wrong
end
Remove and re‐install on other end (See Assembly Manual, Section 4,
Part C)
3
Shade (blind) will
raise quickly
Wrong Decelerator
Remove and re‐install correct Decelerator (See Assembly Manual, Section
4, Part C)
4
Operation of the
wand does not
lower or release
shade
Incorrect handed
Control
Remove control and replace with correct hand control (See Assembly
Manual, Section 4, Part C)
Control is not fully
engaged with
Connector
Check deductions and/or bracket spacing are correct to specification (See
Assembly Manual, Section 4, Part C)
