ROLLEASE ACMEDA
Automate
™
Programming Instructions | Paradigm Cut-In Wall Switches |
9
5
ADDING / REMOVING CONTROLLERS & CREATING GROUP CHANNELS
5.1 Using motor P1 button
5.2 Using a pre-exisiting controller
Select channel on Switch.
Using the side arrow
buttons.
Hold
P1
button on motor
head.
Hold
STOP
on Switch.
Motor Response
Motor Response
RELEASE
P1
IMPORTANT
Multiple motors can be grouped onto shared channels for co-ordinated control. Limit settings and favorite positions cannot be adjusted when
motors are grouped together.
* Confirm that motor limits and favorite position are already set for each individual motor.
* Ensure that each motor you want to group is also assigned to another channel by itself
Press
P2
on existing
switch.
Press
P2
on existing
switch.
Press
P2
on new switch or
remote controller.
Motor Response
Motor Response
Motor Response
