10
| Automate
™
Programming Instructions | Paradigm Cut-In Wall Switches
ROLLEASE ACMEDA
6
TROUBLESHOOTING
Problem
Cause
Remedy
Switch battery is discharged
Replace battery
Motor is not responding
Battery is inserted incorrectly
Check battery polarity
Radio interference / Shielding
Ensure switch is positioned away
from metal objects and that antenna
on motor or reciever is kept straight
and away from metal.
Receiver distance is too far
from remote
Move switch to a closer position
Power failure
Check power supply to motor is
connected and active
Incorrect wiring
Check wiring is connected correctly
(refer to motor installation
instructions)
Cannot set limits on a single
motor (multiple motors
respond)
Using “Group” channels to
adjust motor limits
Always reserve an individual channel
for programming functions.
SYSTEM BEST PRACTICE - Provide
an extra 15 channel switch in your
multi motor projects, that provides
individual control for each motor for
programming purposes.
The switch can be used to set/adjust limits.
Please refer to the motor instructions for limit setting functions.
NOTE
