2. Assembling and Installing the White-ink Model
4
Selecting the Ink Mode
Be sure to perform this operation when you switch on the unit for the first time after purchase. Failing to perform this
operation makes it impossible to use white ink.
➊
Hold down
and
, switch on the main power switch.
➋
Press
when tihis screen appears.
The sub power is switched off.
Important Notes on Selecting the Ink Mode
➢
Failing to select the ink mode correctly makes it impossible to use white ink.
➢
The ink mode can be selected only when you're switching on power for the first time. It is very important to
note that once ink-filling has been started, redoing the selection is impossible.
➢
Selecting the white-ink mode adds two new operation menu items: [INK RENEWAL FULL] and [INK RE-
NEWAL NORMAL].
BUSY
MENU
ENTER
HEATER CONFIG
BASE POINT
SHEET CUT
PAUSE
SET UP
CUT CONFIG
TEST CUT
TEST PRINT
CLEANING
Main power switch
Press at the same time
CHANGE INK MODE
WHITE INK
Display screen
Operation
Panel
Hold down until the
message appears.
