4-2 Performing Texture Printing
Chapter 4 Advanced
61
Chapter 4 Advanced
Performing Texture Printing
Procedure
Prepare the printing data having been created in the previous process which is de-
scribed in "Create The Texture Printing Data" on page 55.
Make the setting to output metallic silver ink with the VersaWorks, and execute the
printing.
To use metallic silver ink, you need to select "CMYKMt", etc. in the print mode of the VersaWorks.
For the detailed method of setting, please refer to “Chapter 3 Printing”.
Printing a Texture Chart
The texture chart is the printing sample of the texture pattern. By printing the texture chart, you can confirm
the “complete texture chart” representing the texture itself that can be printed with “Your Printer” and “Your
Media” (slight pattern differences is possible to occur depending on the conditions of the printer and media.)
By selecting a pattern from this texture chart and creating the printing data using that selected pattern, you
can print your intended pattern almost perfectly.
procedure
Double-click
.
The [Queue A Properties] window appears.
Click
, configure the settings in [Qual-
ity Settings] and [Color Management].
Click [OK].
Note: When printing a texture chart, the [Quality] settings from the [Queue Properties] window are always
applied. Since you cannot change the quality settings for the job using the [Job Settings] window after it
has been added, be sure to configure the settings in the [Queue Properties] window before performing the
following operations.
