9
Using the Vocal Designer Model Expansion
Select the Custom tone (carrier tone)
When you set the Carrier Type to “Custom”, “[ENTER] to Select” is
displayed.
Move the cursor to “[ENTER] to Select” and press the [ENTER] (INIT)
button to switch to the SELECT TONE screen.
To select a carrier tone, select the model that includes the desired
tone, select the tone and then press the [ENTER] (INIT) button to
confirm.
* With the Custom type, you can select the PR-A, PR-B, PR-C, PR-D,
PR-X, COMMON, and Installed EXZ tones, as well as the Z-Core
tones saved in USER.
* All the parameters of the copy source tone (carrier tone) except the
MFX are copied to the custom tone (no link is created to the copy
source tone).
Carrier Thru function (checking the carrier
tone)
When using the “Carrier Type: Custom” setting, you can play the
keyboard while holding down the [SHIFT] button on a specified screen
to hear just the carrier tone (this is called “carrier thru”).
* Press the [
Í
] [
Ë
] buttons while holding down the [SHIFT] button
to keep the unit in the “carrier thru” state.
If you decide to cancel, press the [EXIT] button.
* You can use the Carrier Thru function on the following screens.
¹
VD SETTINGS screen
¹
SELECT TONE screen
¹
TONE COMMON EDIT screen
¹
TONE EDIT PARTIAL screen
¹
TONE MFX screen
