manualshive.com logo in svg

Roland VersaUv LEF - 12i, Master Manual

The Roland VersaUV LEF - 12i Troubleshooting Manual is a comprehensive guide designed to assist users in resolving any issues that may arise during operation. This manual is available for free download from our website, ensuring quick and easy access to the information you need to keep your product running smoothly.

Share
Download
background image

Basic Operation

14

Chapter 1 Basic Operation

Chapter 1 Basic Operation

Press [ ].

If the front cover is open, close it.

Press [ENTER].

The flat table moves, and media height detection starts. The flat table rises while moving backward and 
forward until the media reaches a position where it comes in contact with the head gap sensor.
The media's height will be set automatically to a position about 1 mm (0.04 in.) away from the ink emission 
surface of the print heads.

When the flat table stops moving, the screen shown on the left ap-
pears. Proceed to 

P. 17, "Choosing How to Specify the Print Area"

.

NOTE: Check the height of the media again.

The following step moves the flat table rearward. Check again that the height of the media has been 
adjusted so that the media does not come in contact with the head gap sensor. If the media hits the 
head gap sensor, the media may be damaged or the head gap sensor may fail.
To re-adjust the height of the media, press [ ] and redo steps from Step 

.

AUTO DETECTION

PRINT POS.TYPE
LOWER RIGHT

Summary of Contents for VersaUv LEF - 12i





































































































Reviews:

No comments

Related manuals for VersaUv LEF - 12i

Brands by name

Popular brands

Load more brands