background image

 To Ensure Safe Use

9

 Ink, cleaning liquid, and discharged fluid are flammable and toxic

WARNING

Never drink or sniff ink, cleaning liquid, 

or discharged fluid, or allow them to 

come in contact with the eyes or skin.

Doing so may be hazardous to the health.

CAUTION

Ensure adequate ventilation for the work 

area.

 Failing to perform ventilation may result in a 
health hazard or danger of combustion due 
to ink fumes.

Never allow an ink cartridge to be sub-

jected to impact, and never attempt to 

disassemble.

Ink may leak.

 In the event of ingestion or physical distress

 In the event of contact with the eyes, immediately flush with water for at least 15 minutes. If eye irritation 

continues, seek treatment by a physician.

 In the event of contact with skin, immediately wash with soap. If irritation or inflammation occurs, seek 

treatment by a physician.

 In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly 

inducing vomiting may lead to danger of choking.

 If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea 

persists, seek treatment by a physician.

* Refer to the safety data sheet (SDS) for information on chemicals contained in ink and their safety.

WARNING

Keep  open  flame  away  from  the  work 

area.

Ink and discharged fluid are flammable.

Never store ink, cleaning liquid, or 

discharged fluid in any of the following 

locations.

 Any location exposed to open flame

 Any location where high temperature 

may occur

 Near bleach or any other such oxidiz-

ing agent or explosive material

 Any location within the reach of chil-

dren

Fire may be a danger. Accidental ingestion by 
children may pose a health hazard.

Never place an ink cartridge in fire.

Ink may flow out, catch fire, and spread fire to 
other nearby objects.

 The total weight of this machine weighs 90 kg (198.4 lb.).

WARNING

Install the machine in a location that is 

level, stable, and able to bear the weight 

of the machine.

The total weight of the machine may reach 90 
kg(198.4 lb.) or more. Installation in an unsuit-
able location may cause a major accident, 
including tip over, fall, or collapse.

WARNING

Unloading and emplacement are opera-

tions that must be performed by 4 per-

sons or more.

Tasks that require undue effort when per-
formed by a small number of persons may 
result in physical injury. Also, if dropped, such 
items may cause injury.

Summary of Contents for VersaUV LEF-12

























































Reviews: