Switching the Ink
9
ECO-SOL MAX 3 Ink Switching Method
Clean the locations shown in the following figure.
Exercise special care in cleaning off any accumulated ink. You can make the accumulated ink easier to clean off by ap-
plying cleaning liquid to cleaning locations
and
, and then wiping these locations off with the cleaning stick.
Only moisten the part indicated with diagonal lines in location
with cleaning liquid on the cleaning stick.
Press
.
Close the left cover.
Close the right cover.
When the screen shown in the figure appears, the cleaning of the periphery of the
print heads (manual cleaning) is finished. Proceed to the next procedure.
%.15'%18'4.
%.15'%18'44
12'0%18'44
Also carefully clean the sides of the print heads.
During this work, be careful not to touch the print head surface (nozzle surface) directly with the
cleaning stick.
Area to clean
Area to moisten
Summary of Contents for VersaCAMM ECO-SOL MAX3
Page 21: ...R2 160408 FA01047...
