13
Turning the Power On and Off
The power to the VC-30HD is switched off automatically when four hours have elapsed
with no input of video or audio signals (factory default). When this happens, the VC-
30HD does not function even though the POWER switch is at [ON]. To turn on the power
again, first slide the POWER switch back to [OFF], then slide it to [ON] again.
Deactivating AUTO OFF
If automatic power-off is not needed, use the procedure described below to deactivate
the feature.
1.
Press all buttons for 5 seconds.
Press and hold the [VIDEO INPUT], [OUTPUT FORMAT], and [AUDIO INPUT] buttons for
five seconds.
fig.all-select-buttons.eps
2.
Make sure the feature has been deactivated.
When the AUTO OFF feature is deactivated, the [VIDEO INPUT] and [OUTPUT FORMAT]
indicators all flash.
fig.disable-power-off.eps
3.
Enable the feature again.
In the same way as in step 1, press and hold all buttons for five seconds. When the
feature is enabled, the [AUDIO INPUT] indicators all flash.
fig.enable-power-off.eps
The buttons are nonfunctional while the indicators are flashing (approximately five seconds). Wait
for the indicators to stop flashing before attempting any operations.
About AUTO OFF
Summary of Contents for VC-30HD
Page 35: ...For EU Countries For China...
Page 36: ...5 1 0 0 0 2 0 9 6 2 0 1...
