Roland V-Drums V-Pad PD-80R Owner'S Manual Download Page 3

 

3

 

Next

 

USING THE UNIT SAFELY

 

001

 

Before using this unit, make sure to read the 
instructions below, and the Owner’s Manual.

 

................................................................................................

 

002a

 

Do not open or perform any internal modifications 
on the unit. (The only exception would be where 
this manual provides specific instructions which 
should be followed in order to put in place user-
installable options; see p. 7.)

 

................................................................................................

 

003

 

Do not attempt to repair the unit, or replace parts 
within it (except when this manual provides 
specific instructions directing you to do so). Refer 
all servicing to your retailer, the nearest Roland 
Service Center, or an authorized Roland 
distributor, as listed on the “Information” page.

 

................................................................................................

 

004

 

Never use or store the unit in places that are:

• Subject to temperature extremes (e.g., direct 

sunlight in an enclosed vehicle, near a heating 
duct, on top of heat-generating equipment); or 
are

• Damp (e.g., baths, washrooms, on wet floors); or 

are

• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.

 

................................................................................................

 

005

 

This unit should be used only with a rack or stand 
that is recommended by Roland.

 

................................................................................................

 

006

 

When using the unit with a rack or stand recom-
mended by Roland, the rack or stand must be 
carefully placed so it is level and sure to remain 
stable. If not using a rack or stand, you still need to 
make sure that any location you choose for placing 
the unit provides a level surface that will properly 
support the unit, and keep it from wobbling.

 

................................................................................................

 

011

 

Do not allow any objects (e.g., flammable material, 
coins, pins); or liquids of any kind (water, soft 
drinks, etc.) to penetrate the unit.

 

................................................................................................

 

013

 

In households with small children, an adult should 
provide supervision until the child is capable of 
following all the rules essential for the safe 
operation of the unit.

 

................................................................................................

 

014

 

Protect the unit from strong impact.

 

(Do not drop it!)

 

................................................................................................

 

To avoid personal injury and/or damage to the 
unit, do not touch anything inside the frame of the 
PD-80 and PD-80R.

 

................................................................................................

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

  symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

PD-80/PD-80RW.e4 3 ページ 2004年3月1日 月曜日 午後2時28分

Summary of Contents for V-Drums V-Pad PD-80R









Reviews: