Roland V-Drums TD-20X Owner'S Manual Download

Page: 127 / 156

127

Messages and Error Messages

Messages

Message

Meaning

Action

BULK DUMP
Receiving... Please Wait.

Bulk data is now being received.

–

BULK DUMP
Aborted!

Bulk data transmission was halted.

–

Preset Pattern!

You cannot record on the preset pattern.

Copy the pattern onto a user pattern.

Empty Pattern!

This pattern contains no performance data; it cannot be
edited.

Select the other pattern that contains performance data.

No Empty Pattern!

There are no empty patterns for recording.

Delete unneeded pattern (p. 88).

MIDI Offline!

A MIDI cable was disconnected. (Or communication with
the external MIDI device stopped for some reason.)

Make sure that MIDI cables have not been pulled out or
broken.

MIDI Buffer Full!

A large amount of MIDI messages were received in a short
time, and could not be processed completely.

Confirm that the external MIDI device is properly
connected. If the problem persists, reduce the amount of
MIDI messages sent to the TD-20X.

No Empty Backup!

There are no empty backup area on the CompactFlash card.

Delete unneeded backup (p. 94).

No Empty
Backup Pattern!

There are no empty backup pattern on the CompactFlash
card.

Delete unneeded backup pattern (p. 90).

Power On Too Long.
Please Turn Off!

The power remains ON for a long time.

Turn the TD-20X’s power off, then turn on again.

Auto Shutdown
Completed.
Please Turn Off!

TD-20X_e.book 127 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands