Saving all Sets or just a single Set (Advanced)
V-Accordion
r
105
Saving all Sets or just a single Set
For the “Set” group, you can specify whether you want
to save all Sets or just a specific Set. Saving all Sets
means that all register settings are saved if their boxes
are checked. (You can decide to exclude entire register
sections form this save operation.)
(1) After making the required changes, select the Set
you want to save and press and hold the
[MENU÷WRITE]
button.
The display now shows a page similar to the follow-
ing:
(2) If necessary, deselect (uncheck) the “AllParam”
with the
[DATA÷ENTER]
knob.
This will uncheck all other boxes as well.
(3) Rotate the
[DATA÷ENTER]
knob to select the “Set”
check box and press it to confirm.
(4) Rotate the
[DATA÷ENTER]
knob to select the “
✔
”
mark and press it to confirm your choice.
All other checkboxes of the “Set” group are activated
automatically.
(5) Rotate the
[DATA÷ENTER]
knob to select the “to” or
“ALL” entry to the right of “Set” and press the
[DATA÷ENTER]
knob.
(6) Rotate the
[DATA÷ENTER]
knob to select “ALL” (save
all Sets) or a specific Set number (to save only that
Set) and press the
[DATA÷ENTER]
knob to confirm.
(7)
Use
the
[DATA÷ENTER]
knob to deselect (uncheck)
sections (Common, Treble, Bass, Orch, Orch.Bass,
OrchChd, OrchFBs) you don’t want to save.
(8) Press the
[MENU÷WRITE]
button.
The display briefly shows the following message:
When finished, the display shows the “Function Com-
plete” message.
Saving all registers or just a single
register
You can specify whether you want to save all or just a
specific register. If you don’t save the settings of a given
register, it will return to the last version saved for the
current Set when you select that Set while playing.
(1) After making the required changes, press and hold
the
[MENU÷WRITE]
button.
The display now shows a page similar to the follow-
ing:
(2) If necessary, use the
[DATA÷ENTER]
knob to deselect
“AllParam”.
This will uncheck all other boxes as well.
(3) Rotate the
[DATA÷ENTER]
knob to select the check
box of the section whose settings you want to save
and press
[DATA÷ENTER]
to confirm.
In the example above, we selected the Treble section.
(4) Rotate the
[DATA÷ENTER]
knob to activate “Treble”
checkboxes and press
[DATA÷ENTER]
to confirm.
A “
✓
” appears in the checkbox.
(5) Rotate the
[DATA÷ENTER]
knob to select the “to” or
“ALL” entry to the right of the “Treble” field and
press
[DATA÷ENTER]
to confirm.
(6) Rotate the
[DATA÷ENTER]
knob to select “ALL” (save
all registers) or a specific Treble register number,
then press the
[DATA÷ENTER]
knob to confirm.
(7) Press the
[MENU÷WRITE]
button.
The display briefly shows the following message:
When finished, the display shows the “Function Com-
plete” message.
FR-7x GB.book Page 105 Tuesday, August 25, 2009 10:58 AM
